CWNA-109 Most Reliable Questions - Reliable Study CWNA-109 Questions

Wiki Article

DOWNLOAD the newest Exam4PDF CWNA-109 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1y034TTlI1pxtVQZ8vGNue3n0VtwrCpqL

When preparing for the test CWNA-109 certification, most clients choose our products because our CWNA-109 learning file enjoys high reputation and boost high passing rate. Our products are the masterpiece of our company and designed especially for the certification. Our CWNA-109 latest study question has gone through strict analysis and verification by the industry experts and senior published authors. The clients trust our products and treat our products as the first choice. So the total amounts of the clients and the sales volume of our CWNA-109 learning file is constantly increasing.

CWNP CWNA-109 Exam Syllabus Topics:

TopicDetails
Topic 1
  • WLAN Network Security: It addresses the concepts of weak security options, security mechanisms for enterprise WLANs, and security options and tools used in wireless networks.
Topic 2
  • RF Validation and WLAN remediation: This topic covers RF interference, WLAN performance, the basic features of validation tools, and common wireless issues.
Topic 3
  • WLAN Network Architecture and Design Concepts: This topic deals with describing and implementing Power over Ethernet (PoE). Furthermore, the topic covers different wireless LAN architectures, coverage requirements, roaming considerations, and common proprietary features in wireless networks.

>> CWNA-109 Most Reliable Questions <<

Reliable Study CWNA-109 Questions - Dumps CWNA-109 Collection

With our CWNA-109 study materials, only should you take about 20 - 30 hours to preparation can you attend the exam. The rest of the time you can do anything you want to do to, which can fully reduce your review pressure. Saving time and improving efficiency is the consistent purpose of our CWNA-109 Learning Materials. With the help of our CWNA-109 exam questions, your review process will no longer be full of pressure and anxiety.

CWNP Wireless Network Administrator (CWNA) Sample Questions (Q63-Q68):

NEW QUESTION # 63
The center frequency of channel 1 in the 2.4 GHz band is 2.412 GHz (2412 MHz). What is the center frequency of channel 4?

Answer: A

Explanation:
The center frequency of channel 4 in the 2.4 GHz band is 2.427 GHz (2427 MHz). The center frequency of a channel is the midpoint of its frequency range, where the signal strength is highest and most concentrated.
The center frequency of channel 1 in the 2.4 GHz band is 2.412 GHz (2412 MHz), as given in the question.
The center frequency of each subsequent channel is obtained by adding 5 MHz to the previous channel's center frequency, since the channels are spaced 5 MHz apart from each other in this band. Therefore, to find the center frequency of channel 4, we need to add 15 MHz (5 MHz x 3) to the center frequency of channel 1:
2.412 GHz + 0.015 GHz = 2.427 GHz
Alternatively, we can use a formula to calculate the center frequency of any channel in the 2.4 GHz band:
Center frequency (GHz) = 2.407 + (0.005 x Channel number)
Using this formula for channel 4, we get:
Center frequency (GHz) = 2.407 + (0.005 x 4)
Center frequency (GHz) = 2.407 + 0.02
Center frequency (GHz) = 2.427 References: 1, Chapter 3, page 85; 2, Section 3.2


NEW QUESTION # 64
The requirements for a WLAN you are installing state that it must support unidirectional delays of less than
150 ms and the signal strength at all receivers can be no lower than -67 dBm. What application is likely used that demands these requirements?

Answer: A

Explanation:
VoIP (Voice over Internet Protocol) is an application that is likely used that demands the requirements of unidirectional delays of less than 150 ms and the signal strength at all receivers can be no lower than -67 dBm.
VoIP is an application that allows users to make and receive voice calls over a network, such as the Internet or a WLAN. VoIP is a real-time and interactive application that requires high quality of service (QoS) to ensure good user experience and satisfaction. One of the QoS metrics for VoIP is delay, which is the time it takes for a voice packet to travel from the sender to the receiver. Delay can affect the quality and intelligibility of the voice conversation, as well as the synchronization and naturalness of the dialogue. The ITU-T G.114 recommendation suggests that the maximum acceptable one-way delay for VoIP should be less than 150 ms, as anything higher than that can cause noticeable degradation and annoyance to the users. Another QoS metric for VoIP is signal strength, which is the measure of how strong the RF signal is at the receiver. Signal strength can affect the reliability and performance of the wireless connection, as well as the data rate and throughput of the VoIP traffic. The CWNA Official Study Guide recommends that the minimum signal strength for VoIP should be -67 dBm, as anything lower than that can cause packet loss, retries, jitter, and other issues that can impair the voice quality. References: 1, Chapter 10, page 398; 2, Section 6.1


NEW QUESTION # 65
The BSA of an AP covers the area used by the sales and marketing department. Thirty-five stations operate in this space. The users indicate that they need more throughput and all stations are 5 GHz capable 802.11ac clients. The current AP configuration uses 20 MHz channels in both 2.4 GHz and 5 GHz. What is the least expensive solution available for increasing throughput for these users without implementing configuration options that are not recommended?

Answer: A

Explanation:
The least expensive solution available for increasing throughput for these users without implementing configuration options that are not recommended is to use a 40 MHz channel on the 5 GHz radio. This solution can double the channel bandwidth and increase the data rates for the 5 GHz capable 802.11ac clients. Using a
40 MHz channel on the 5 GHz radio is also less likely to cause co-channel interference or overlap with other channels than using a 40 MHz channel on the 2.4 GHz radio, which has only three non-overlapping channels.
Using a 160 MHz channel on the 5 GHz radio may provide even higher throughput, but it may also consume too much of the available spectrum and cause more interference with other devices or networks. Installing a second AP in the coverage area may also improve the throughput, but it may require additional costs and configuration. References: [CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 216; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 206.


NEW QUESTION # 66
You manage a WLAN with 100 802.11ac access points. All access points are configured to use 80 MHz channels. In a particular BSS, only 40 MHz communications are seen. What is the likely cause of this behavior?

Answer: D

Explanation:
https://7signal.com/802-11ac-migration-part-2-whats-nobodys-telling-you-about-80mhz-and-160mhz-channel- bonding The clients are all 802.11n STAs or lower is the likely cause of this behavior. If a WLAN with 100 802.11ac access points is configured to use 80 MHz channels, but only 40 MHz communications are seen in a particular BSS, it means that the clients in that BSS do not support 80 MHz channels. This could be because they are using older standards, such as 802.11n or lower, that do not support 80 MHz channels. Alternatively, they could be using newer standards, such as 802.11ac or ax, but have their channel width settings limited to 40 MHz or lower due to device capabilities or configuration options. In either case, the AP will adapt to the client's channel width and use only 40 MHz of the 80 MHz allocated bandwidth to communicate with them.
This will reduce the potential throughput and efficiency of the WLAN. References: , Chapter 3, page 111; , Section 3.2


NEW QUESTION # 67
XYZ Company has decided to install an 802.11 WLAN system that will support 1083 wireless users, but they are concerned about network security. XYZ is interested in deploying standardized security features. In addition to WPA2-Enterprise with PEAP and role-based access control, XYZ would like to support management frame protection as well as a fast secure roaming protocol for future mobile handsets.
As XYZ Company selects a product to deploy, what two IEEE amendments, which are included in 802.11-
2016, and 802.11-2020 should be supported to provide the management frame protection and fast secure roaming security features?

Answer: C

Explanation:
The two IEEE amendments that should be supported to provide the management frame protection and fast secure roaming security features are 802.11r and 802.11w12.
* 802.11r (Fast BSS Transition): This amendment to the IEEE 802.11 standard permits continuous connectivity aboard wireless devices in motion, with fast and secure client transitions from one Basic Service Set to another1.
* 802.11w (Management Frame Protection): This amendment increases the security of its management frames2.


NEW QUESTION # 68
......

Most of the materials on the market do not have a free trial function. Even some of the physical books are sealed up and cannot be read before purchase. As a result, many students have bought materials that are not suitable for them and have wasted a lot of money. But CWNA-109 guide torrent will never have similar problems, not only because CWNA-109 exam torrent is strictly compiled by experts according to the syllabus, which are fully prepared for professional qualification examinations, but also because CWNA-109 Guide Torrent provide you with free trial services. Before you purchase, you can log in to our website and download a free trial question bank to learn about CWNA-109 study tool.

Reliable Study CWNA-109 Questions: https://www.exam4pdf.com/CWNA-109-dumps-torrent.html

DOWNLOAD the newest Exam4PDF CWNA-109 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1y034TTlI1pxtVQZ8vGNue3n0VtwrCpqL

Report this wiki page